Let Us to Know Cobalt Saw Tips

Update:05 Dec 2017

Today let us to know another Cobalt alloy products , we […]

Today let us to know another Cobalt alloy products , we call it Cobalt Saw Tips and it is very good at cutting woods .


Welding on Circular saw and Band saws teeth to cut woods

Cobalt tipped Saws ADVANTAGES:

The Cobalt Tipped saws, have a tip welded directly to the saw tooth. After all of the teeth
have been profile ground, the saw then goes to a side grinding machine to grind the sides
of the tips to specific relief angles and kerf size depending upon the given cutting application
for the saw.

Cobalt tipped saws have shown to be able to:
•Increase run times.
•Cut with thinner kerf.
•Produce a smoother sawn surface.
•Reduce sawing variations - Better cutting accuracy. (allowing for tighter target sizes)
•Reduce the power consumption during cutting.
•Reduce the cutting downtime for saw changes and saw maintenance.
•Increased saw life due to the ability to achieve more sharpenings and at longer intervals.

Cobalt is also more resistant to the abrasive acids found in some woods like red cedar.
This allows the tips to stay sharp longer than carbide tips and significantly longer
than swaged saw steel when cutting unseasoned woods.

We have produced more than 60 kinds of specifications tips and export to Canada, USA,
France, New Zealand, Australia, Norway and Russia etc. more than 40 countries and areas.
Welcome to contact us for all around service.

Contact : Elle Lee