Stellite 12 Saw Tips For Circular Saw And Band Saws For Wood Cutting

Contact Us

Product Details

Stellite alloys consist of complex carbides in an alloy matrix. Their exceptional wear resistance is due mainly to the unique inherent characteristics of the hard carbide phase dispersed in a CoCr alloy matrix.

 

Stellite 12 Saw tips are made of Stellite alloy in grade Co12,so the following information is all about Co12.

 

(1). Stellite Alloy 12 could be considered an intermediate alloy .

(2). It contains a higher fraction of hard, brittle carbides than Stellite Alloy 6

(3).It has increased resistance to low angle erosion, abrasion, and severe sliding wear while stretaining reasonable impact and cavitation resistance.

(4). Stellite Alloy 12 is often used self-mated or running against .

 

What is the Details of sytop stellite saw tips ?

 

Material

Stellite alloy –Grade Co12

Process

Powder Metallurgy , it is short for PM

Hardness

44-49HRC

Density

8.5g/cm ³

Size

Triangle , rectangle and profiled ,

customized-made is also available

Properties

Wear and corrosion resistance

Application

Stellite Alloy is also more resistant to the abrasive acids found in some woods like red cedar.

Instructions

The Stellite Alloy Tipped saws, have a tip welded directly to the saw tooth

Usage

Welding on Circular saw and Band saws teeth to cut woods

Tolerance control

Surface polishing and tolerance ±0.003”/±0.005” (±0.0762/±0.127mm )

Production lead time

Samples 7 days , normal order 10-25 days

Production capacity 

1000,000pcs one month.

Package 

1000pcs in 1 plastic bag and put in 1 plastic keg

 

Stellite Alloy tipped saws have shown to be able to:

 

•Increase run times.

•Cut with thinner kerf.

•Produce a smoother sawn surface.

•Reduce sawing variations - Better cutting accuracy. (allowing for tighter target sizes)

•Reduce the power consumption during cutting.

•Reduce the cutting downtime for saw changes and saw maintenance.

•Increased saw life due to the ability to achieve more sharpening and at longer intervals.

Stellite Alloy is also more resistant to the abrasive acids found in some woods like red cedar.This allows the tips to stay sharp longer than carbide tips and significantly longerthan swaged saw steel when cutting unseasoned woods.

Cobaltalloy have produced more than 100 kinds of specifications tips and export to Canada, USA,France, New Zealand, Australia, Norway and Russia etc. more than 40 countries and areas.

 

Which size do you supply ? 

 

We can manufacture Stellite Alloy Saw tips according to your drawings and demands. We can produce rectangular, triangle, specical-shaped saw tips .and we also can manufacture saw tips of U.S.A. standard and Europe standard

Cobalt-chromium Alloy-saw-tips-size-1

Cobalt-chromium Alloy-saw-tips-size-2 

 

Application:

 

Welding on Circular saw and Band saws teeth to cut woods

Cobalt-chromium Alloy-saw-tips-size-3

 

Send your inquiry details to us for free samples and best price !

Feedback





  • captcha